Star Corner Art Slot punch by The Punch Bunch
Large Fern punch by The Punch Bunch
Mega Fern punch by The Punch Bunch
Green cardstock cut to 5” x 10”
Scrap of matching green cardstock approximately 8 1/2” x 5 1/2” for punching
ferns
Red cardstock cut to 4 1/2” x 4 1/2”
Tan Cardstock cut to 5” x 5”
White cardstock 1” x 3”
12” Paper Trimmer by Fiskars
Clear mounting
stickers by
Fiskars
Paper Crimper by Fiskars
Four white star eyelets
Eyelet punch and setter
Two way adhesive
Merry Christmas Class A Peel Stickers by Stampendous
-
Fold the green 5” x 10”
cardstock in half to form a card.
-
Punch all four corners of
the red 4 1/2” x 4 1/2” cardstock with the Star Corner Art Punch.
-
Carefully fold the punch
corner over as shown in the card example.
-
Put the tan 5” x 5”
cardstock thru the paper crimper.
-
Using the paper trimmer, cut
the crimped cardstock 4 1/8” x 4 1/8”.
-
Place a few clear mounting
stickers on the back of the crimped cardstock.
-
Center the crimped cardstock
onto the red cardstock. Carefully insert the corners of the crimped cardstock
thru the punched corners of the red cardstock. (tip: with adhesive on the back
of the crimped cardstock be careful not to press down to hard until you have
everything centered.)
-
Punch a 1/8” hole in the
center of each corner star using an eyelet punch. Place a white star eyelet
thru each hole and set using an eyelet setter.
-
Center and adhere red and
tan card facing onto green card front.
-
Punch 7 Mega ferns
and 12 Large ferns from green cardstock
-
Adhere the Mega ferns onto
the center of the card to create a wreath.
-
Adhere the Large ferns onto
the Mega ferns to create a full wreath. (tip: have some of the large ferns
stick out a bit for a more realistic looking wreath.)
-
Cut the Merry Christmas
stickers apart to create two separate words. Place each word onto the white 1”
x 3” cardstock strip.
-
Trim around each word and
adhere to the center of the card.
