Instructions
and Information for The Power PunchTM and Power Punch ProTM
Craft Punch Press Tool
Instructions
1.
Place the template on the pin of the base table.
2. Insert
punch into the template.
3. Set
paper on top of template, and slide into punch opening.
4. Apply
light pressure to the arm of the Power Punch.
5. Done!
Fast, easy, fun and accurate!
Information
 |
Clean with mild soap and water only. |
|
Use the diagonal lines to guide your paper
in for corner punches.
 |
Place your paper in the punch. If you
are using the punch without the corner guides, make sure it goes back far
enough to allow the punch to connect with your paper. |
|
Visually make sure the distance away
from the closest diagonal line is the SAME on both sides. |
|
If the distance is the same, you will
get a perfect corner every time. |
|
This technique takes a little practice.
You will love it once you play with it a little. |
|
|
Note that several patterns are designed to
hold the Craft Punch upside down. This is great for doing double punching or
silhouette frame punching! |
|
Apply only enough pressure to the arm of
the Power Punch to actuate the punch. Too much pressure can damage some
craft punches. Use particular care when using the silhouette
punches. This style of punch has a double housing and is easily damaged. The
Punch Bunch is not responsible for damage to your punches while using the
Power Punch. |
|
Used correctly, the improved alignment and
perpendicular force provided by the Power Punch actually improves punch life
and helps reduce jams. |
|
The Punch Bunch reserves the right to
change the design of the Power Punch and Punch Templates at any time. |
